Skip to content

Cart

Your cart is empty

Fluid Film Lanolin Based Corrosion Protection & Lubricant - 11.75oz Aerosol

A Lanolin-based penetrant, lubricant and corrosion preventative that is perfect for Foil Drive maintenance. Non-toxic, solvent-free and it never dries out.

Sold out - Please contact us to order!
Sale priceDhs. 95.00 AED
FLUID FILM® is a penetrant and lubricant also used for corrosion prevention. It is a non-toxic, long lasting, thixotropic liquid that has been used for over fifty years in the highly corrosive marine environment of ships and offshore drilling rigs.

Formulated from specially processed wool-wax, highly refined petroleum oils and selected agents, it provides corrosion control, penetration, metal wetting and water displacement. It contains no solvents, will not dry out, and will penetrate to the base of all metals, providing protection from both natural and industrial atmospheres.

Heavily corroded and/or frozen parts such as nuts, bolts and shafts that would normally be damaged during maintenance can be salvaged by applying FLUID FILM®.

TYPICAL PROPERTIES +
  • Appearance: Clear, straw coloured liquid
  • Flash Point (bulk liquid): 405°F minimum, ASTM-92 Cleveland Open Cup
  • Non-Volatile: 89% minimum (3 hours @ 220°F)
  • Specific Gravity: 0.875 - 0.885 (less propellant)
  • Effect on Aluminium: No pitting
  • Effect on Paint: None on most painted surfaces
  • Effect on Rubber: None on neoprene and buna-n. May cause swelling on non oil-resistant rubber goods
  • Water Replacement: Displaces water from all metal surfaces (MIL-C-23411, Paragraph 3.6)
  • Toxicity: Non-toxic, LD-50 greater than 3 grams per kilogram. Non-irritating skin response
  • Contains no silicones
CORROSION PROTECTION +
  • ASTM D-1735 Humidity Cabinet: Passes 50 days
  • ASTM D-1748 Humidity Cabinet: Passes 30 days
  • MIL-C-16173: Grade 2 soft films. Meets and exceeds salt spray requirements
  • Wear Prevention (ASTM D-2266 Four Ball): 40kg, 1200 RPM for 1 hour @ 167°F. Scar diameter 0.49mm
WHAT'S INCLUDED +
  • 1x 11.75oz (333g) Fluid Film Aerosol Can
SAFETY +
Extremely flammable. Contents under pressure. Do not puncture, incinerate or store above 120°F (49°C). Keep away from open flame.

To clean the spray nozzle, turn the can upside down, point in a safe direction and spray until only propellant escapes.